PorcelQuick Adped

PorcelQuick The PorcelQuick Adped system is a system of paving support pads that support your porcelain tiles, speed up your install and save on your costs. External porcelain tiles and paving slabs require a more solid base than traditional stone or concrete paving, however this can be both time consuming and costly. The PorcelQuick Adped system allows you to create a series of support pedestals which the tiles can be fixed to. The Adpeds are made from strong yet lightweight plastic which can be snapped to create a half or quarter circles to fit edges and corners. Once filled with a mixture of fast setting cement and sharp sand the Adped support pedestal will harden. At this point, you can lay paving and an 18mm+ porcelain tile can be installed. For raised patios you can adjust the height range of the surface by staking Adped pedestal supports on top of eachother - up to 3 high! Each Adped measures 25mm high with a bottom diameter of 250mm and a top diameter of 240mm. <h3>Benefits of the PorcelQuick Adped System</h3> <ul> <li>Reduced loading out requirements for the fixing bed by 80%</li> <li>Shortened installation times</li> <li>The system allows water to drain freely</li> <li>Carbon footprint reduced by up to 80%</li> <li>Can take loads of up to 1000kg</li> <li>Resists structural movement</li> <li>Lower risk of back injury</li> <li>25 year guarantee</li> </ul> Tiling Accessories > Pedestals PQADPED PQADPED 1.80 GreenGarden Paving https://www.greengardenpaving.com/product/PQADPED

Location

Home › Paving Pedestals › PorcelQuick Adped

PorcelQuick Adped

PorcelQuick Adped External Porcelain Paving Pedestal

The PorcelQuick Adped system is a system of paving support pads that support your porcelain tiles, speed up your install and save on your costs.

External porcelain tiles and paving slabs require a more solid base than traditional stone or concrete paving, however this can be both time consuming and costly. The PorcelQuick Adped system allows you to create a series of support pedestals which the tiles can be fixed to. The Adpeds are made from strong yet lightweight plastic which can be snapped to create a half or quarter circles to fit edges and corners.

Once filled with a mixture of fast setting cement and sharp sand the Adped support pedestal will harden. At this point, you can lay paving and an 18mm+ porcelain tile can be installed. For raised patios you can adjust the height range of the surface by staking Adped pedestal supports on top of eachother - up to 3 high!

Each Adped measures 25mm high with a bottom diameter of 250mm and a top diameter of 240mm.