Lithofin Power Clean Lithofin Power Clean LITHOFIN <p>Lithofin MN Power Clean is a special product from the Lithofin range for marble, natural and engineered stone (MN). It is free of solvents, low in odour and economical in use.</p> <p>Lithofin MN Power Clean is for thoroughly cleaning used or exceptionally dirty natural stone surfaces and for initially cleaning newly laid surfaces. Suitable for use on polished, finely honed and rough marble and other natural stones. Facilitates removing cement residues from polished marble.</p> <p>Lithofin MN Power Clean is a mildly alkaline cleaner, which contains a balanced mixture of cleaning components which guarantee optimal performance. It is nearly odourless and highly economic.</p> <p>Lithofin MN Power Clean removes grease and oil, all kinds of general and ingrained dirt as well as floor polish residues, old acrylic emulsions, and care products. This product is suitable for both indoor and outdoor uses.</p> <p><strong>Technical Data:</strong></p> <ul> <li>Density: approx. 1,0 g/cm</li> <li>Appearance: liquid, colourless, clear</li> <li>Odour: pleasant</li> <li>pH-Value: approx. 10</li> <li>Flash Point: n.a.</li> <li>Solubility in Water: complete</li> </ul> <p><strong>Directions for Use:</strong></p> <p>Apply and evenly distribute Lithofin MN Power Clean diluted up to 1:10 and wipe the surface. In case of stubborn dirt deposits, apply undiluted or diluted up to 1:5 with a brush and distribute. Allow the product to work for 10 to 20 minutes; brush occasionally. Do not allow to dry, add water if necessary. Brush again before wiping up. On large areas, use a squeegee to remove the product. Wash the surface thoroughly with clean water. If the result is not satisfying, repeat the process allowing the product to work longer and brushing more vigorously.</p> <p><strong>Note:</strong> avoid splashes on sensitive areas such as metal or wood, painted or varnished surfaces, wall paper, etc. Always test the product in an inconspicuous area prior to use. Coverage: as supplied: approx. 5 to 10m depending on dirt diluted: up to 30m</p> <p><strong>Coverage:</strong></p> <ul> <li>As supplied: approx. 10m depending on dirt</li> <li>Diluted: up to 30m</li> </ul <h3>Key features and benefits include:</h3> <ul> <li><strong>Size</strong>: 1 litre</li> <li><strong>Coverage</strong>: <em>Undiluted</em>: Approximately 5-10m<sup>2</sup>, <em>Diluted</em>: Up to 30m<sup>2</sup></li> <li>Suitable for use on polished, finely honed, rough natural stone, and engineered stone tile products</li> <li>Suitable for use indoors and outdoors</li> </ul> Cleaning and Sealing > Tile Cleaning LFPC1L LFPC1L 14.40 GreenGarden Paving
Location
HomeAncillaries › Lithofin Power Clean

Lithofin Power Clean

Lithofin MN Power-Clean (1L)

Lithofin MN Power Clean is a special product from the Lithofin range for marble, natural and engineered stone (MN). It is free of solvents, low in odour and economical in use.

Lithofin MN Power Clean is for thoroughly cleaning used or exceptionally dirty natural stone surfaces and for initially cleaning newly laid surfaces. Suitable for use on polished, finely honed and rough marble and other natural stones. Facilitates removing cement residues from polished marble.

Lithofin MN Power Clean is a mildly alkaline cleaner, which contains a balanced mixture of cleaning components which guarantee optimal performance. It is nearly odourless and highly economic.

Lithofin MN Power Clean removes grease and oil, all kinds of general and ingrained dirt as well as floor polish residues, old acrylic emulsions, and care products. This product is suitable for both indoor and outdoor uses.

Technical Data:

  • Density: approx. 1,0 g/cm
  • Appearance: liquid, colourless, clear
  • Odour: pleasant
  • pH-Value: approx. 10
  • Flash Point: n.a.
  • Solubility in Water: complete

Directions for Use:

Apply and evenly distribute Lithofin MN Power Clean diluted up to 1:10 and wipe the surface. In case of stubborn dirt deposits, apply undiluted or diluted up to 1:5 with a brush and distribute. Allow the product to work for 10 to 20 minutes; brush occasionally. Do not allow to dry, add water if necessary. Brush again before wiping up. On large areas, use a squeegee to remove the product. Wash the surface thoroughly with clean water. If the result is not satisfying, repeat the process allowing the product to work longer and brushing more vigorously.

Note: avoid splashes on sensitive areas such as metal or wood, painted or varnished surfaces, wall paper, etc. Always test the product in an inconspicuous area prior to use. Coverage: as supplied: approx. 5 to 10m depending on dirt diluted: up to 30m

Coverage:

  • As supplied: approx. 10m depending on dirt
  • Diluted: up to 30m
Key features and benefits include:
  • Size: 1 litre
  • Coverage: Undiluted: Approximately 5-10m2, Diluted: Up to 30m2
  • Suitable for use on polished, finely honed, rough natural stone, and engineered stone tile products
  • Suitable for use indoors and outdoors
#
LFPC1L
Quantity Discounts
1+£12.00£14.40 inc. VAT
4+£10.00£12.00 inc. VAT
Your Total
Qty
each

Delivery Info.

Standard Delivery Time: 3 - 4 Days
Express Delivery Time: 1 - 2 Days*

Delivery: FREE on orders over £300!*

* Orders completed and payment cleared by 12 noon, delivery to mainland UK only.
See our delivery page for full details.

Resources

For more information, please refer to the Lithofin MN Power-Clean Technical Guide.

Delivery
Enquiries0333 320 70 36Week Days 8am - 4pm
Enquiries0333 320 70 36Week Days 8am - 4pm
Categories
Your Basket
0
© 2020 Hampshire Tile Warehouse Ltd. trading as GreenGarden Paving |  Delivery  |  Contact Us
Registered in England & Wales, Company Reg. No. 1224335