Lithofin KF Cement Residue Remover is a highly active cleaning concentrate based on a special composition of acids and supporting agents to remove cement residue. It is nearly odourless and does not develop any vapours.
It dissolves organic deposits such as cement and mortar residues, residues of flexible grouting materials, efflorescence, rust and calcium deposits. The dirt can then be completely removed from the surface easily with minimal effort.
Due to its mild odour, Lithofin KF Cement Residue Remover is particularly suitable for indoor use. For cleaning all ceramic surfaces, which need to be cleaned after laying and grouting. The original appearance of the surface is restored. It is suitable for all acid resistant ceramic wall and floor tiles, quarry tiles, porcelain, clay and brick as well as terracotta surfaces.
Technical Data:
- Density: 1.1 g/cm³
- pH-Value: <1 (concentrate)
- Appearance: clear, orange
- Odour: fruity acidic
- Solubility in Water: very good
Directions for Use:
Dilute Lithofin KF Cement Residue Remover approx. 1:4 with water depending on the stubbornness of the deposits. Apply the solution to the wet surface and spread with a mop, white pad or scrubbing brush. Redistribute several times. After 10 minutes, brush the surface and rinse the solution with a sponge or a wet and dry vac. Rinse well with clear water. In case of cement based grouting materials, the dilution rate can be adjusted to 1:15.
Please Note: always test the product in an inconspicuous area prior to use. Acid sensitive surface such as enamel, zinc, marble, limestone, certain decorative tiles, wood, etc. must be protected against splashes.
Environmental Protection:
The contained surfactants are biologically degradable according to EU-regulations. Free of phosphates. Disposal: diluted product may be added to waste water. Containers are made of environmentally friendly polyethylene (PE). Clean containers can be recycled through collection system.
Features & Benefits of Lithofin Cement Residue Remover
- 1 litre bottle of cement remover
- Approximately 12-30m2 of coverage (depending on the type and degree of dirt)
- Suitable for indoor use
- Easy to apply
- Fast-acting
This product will only be delivered to Mainland UK
Delivery Info.
Standard Delivery Time: 3 - 4 Days
Express Delivery Time: 1 - 2 Days*
Delivery: FREE on orders over £300!*
* Orders completed and payment cleared by 12 noon, delivery to mainland UK only.
See our delivery page for full details.
LITHOFIN
<p><strong>Lithofin KF Cement Residue Remover</strong> is a highly active cleaning concentrate based on a special composition of acids and supporting agents to remove cement residue. It is nearly odourless and does not develop any vapours.</p>
<p>It dissolves organic deposits such as cement and mortar residues, residues of flexible grouting materials, efflorescence, rust and calcium deposits. The dirt can then be completely removed from the surface easily with minimal effort.</p>
<p>Due to its mild odour, Lithofin KF Cement Residue Remover is particularly suitable for indoor use. For cleaning all ceramic surfaces, which need to be cleaned after laying and grouting. The original appearance of the surface is restored. It is suitable for all acid resistant ceramic wall and floor tiles, quarry tiles, porcelain, clay and brick as well as terracotta surfaces.</p>
<p><strong>Technical Data:</strong></p>
<ul>
<li>Density: 1.1 g/cm³</li>
<li>pH-Value: <1 (concentrate)</li>
<li>Appearance: clear, orange</li>
<li>Odour: fruity acidic</li>
<li>Solubility in Water: very good</li>
</ul>
<p><strong>Directions for Use:</strong></p>
<p>Dilute Lithofin KF Cement Residue Remover approx. 1:4 with water depending on the stubbornness of the deposits. Apply the solution to the wet surface and spread with a mop, white pad or scrubbing brush. Redistribute several times. After 10 minutes, brush the surface and rinse the solution with a sponge or a wet and dry vac. Rinse well with clear water. In case of cement based grouting materials, the dilution rate can be adjusted to 1:15.</p>
<p>Please Note: always test the product in an inconspicuous area prior to use. Acid sensitive surface such as enamel, zinc, marble, limestone, certain decorative tiles, wood, etc. must be protected against splashes.</p>
<p><strong>Environmental Protection:</strong></p>
<p>The contained surfactants are biologically degradable according to EU-regulations. Free of phosphates. Disposal: diluted product may be added to waste water. Containers are made of environmentally friendly polyethylene (PE). Clean containers can be recycled through collection system.</p>
<h3>Features & Benefits of Lithofin Cement Residue Remover</h3>
<ul>
<li>1 litre bottle of cement remover</li>
<li>Approximately 12-30m<sup>2</sup> of coverage (depending on the type and degree of dirt)</li>
<li>Suitable for indoor use</li>
<li>Easy to apply</li>
<li>Fast-acting</li>
</ul>
<p><strong>This product will only be delivered to Mainland UK</strong></p>
Cleaning and Sealing > Tile Cleaning
LFCRR1L
LFCRR1L
14.32
GreenGarden Paving
https://www.greengardenpaving.com/product/LFCRR1L
