10mm Bath Stone Straight Edge Tile Trim (ESA100.414)

Genesis Straight Edge Tile Trim has been designed to protect corners and avoid the unsightly and fragile 45 degree cut. The defined square edge clearly outlines coverings such as rectified porcelain, these profiles offer a practical and aesthetic solution, ideal for walls and floors. Available in polished, brushed, stone effect or powder coated aluminium, the trims are 2.5m long and are available in the following sizes; 6mm, 8mm, 10mm, 12mm and 15mm.

Installing Genesis ESA Straight Edge tile trim:

1. Select an ESA trim that fits the thickness of your tiles.
2. Trowel tile adhesive over the area that forms the perimeter of the tiled covering.
3. Press the perforated anchoring leg of the ESA into the tile adhesive and align, mechanical fix if required.
4. Trowel additional adhesive over the perforated anchoring leg to ensure full coverage.
5. Solidly embed the tiles so that the tiled surface is flush with the top of the profile, the profile should not be higher than the tiled surface, but rather up to approximately 1 mm lower.
6. Fill the joint completely with grout.