BAL Flexbone 2Easy is a unique uncoupling mat that requires no adhesive between the matting and the substrate. Because the matting is loose-laid the preparation required is greatly reduced - in fact if the floor is solid & level all you need to do is sweep! That means you don't need to remove residue, bitumen or laitance or prime the floor prior to installation and you can start tiling onto contaminated, stained or cracked screeds or bitumen straight away. You can even use it over new anhydrite or sand & cement screeds that are not cured as the moisture will evaporate through covering joints.
Flexbone 2Easy is suitable for light commercial and domestic projects such as hallways, kitchens, bathrooms, office walkways, department store concessions, trade show stands and car showrooms (if cars are moved and not driven). Because the matting is not stuck down it's the perfect choice for rental or period properties, or areas where the flooring may need to be changed frequently. Using Flexbone 2Easy saves up to 2kg per m2 in adhesive when compared to bonded mats. It can be used with underfloor heating, on timber floors and existing load bearing floor surfaces.
Please note that Flexbone 2Easy cannot be used in external environments, substrates with vertical movement, uneven floor surfaces, bridging movement joints or heavy traffic areas.
BAL Flexbone 2Easy is 1m wide, 3mm thick and each 20m roll weighs approximately 18kg. It is available in 5m cut lengths.