Tile Trims are formed corners that protect the edging of your outdoor tiles from damage. They improve the overall structural integrity of a tiles area by absorbing compressive impacts and prevent chipping on the tiled edge. These 20mm Tile Trims can be used with tiles up to 20mm thick and offer a solution that is not just practical - it's aesthetically pleasing too! Unlike our 10mm Aluminium Tile Trims that are recommended for indoor use, our outdoor 20mm tile trims are constructed from rugged stainless steel.

Stainless steel has a smooth and non porous surface making it especially difficult for the adhesion and survival of bacteria, fungi and micro-organisms such as viruses. The high level of hygiene associated with the substrate is why stainless steel outdoor tile trims are often used around swimming pools. It's also unlikely to suffer dents and nicks because of its tensile strength, keeping it safe to walk on and free from aesthetic damage.

All our tile trims come in 2.5 metre lengths unless otherwise specified. Choose from straight edge, round edge, or double pencil profiles depending on your job requirements. We provide all the elements required for your project, the trims, corner pieces, and end caps.

How to install tile trims

• Trowel tile adhesive over the area that forms the perimeter of the tiled covering.
• Press the perforated anchoring leg of the ESA into the tile adhesive and align, mechanical fix if required.
• Trowel additional adhesive over the perforated anchoring leg to ensure full coverage.
• Solidly embed the tiles so that the tiled surface is flush with the top of the profile.
• Fill the joint completely with grout.