Email a Friend

GEO-Fix Coverage Calculator for SINGLE SLAB SIZE

Show >

GEO-Fix Coverage Calculator for MULTIPLE SIZE FLAGSTONE Patterns

Show >

GEO-Fix is a ready mixed jointing compound, which can simply be brushed into joints with minimal effort and easily finished by compacting with a pointing tool, saving valuable time compared to traditional wet pointing methods.

Simply open, pour, brush and enjoy! It is as simple as that. GEO-Fix Jointing Compound is the simple and speedy way to apply joints to flagstones.

Key Features

• Non staining - cement free

• Sets hard, won't crack or wash out

• Resists weed and plant growth between joints

• Totally weatherproof - unaffected by frost

• Suitable for all joints of 5mm wide and over

• Water and air permeable - allows water to escape and the continued nourishment of tree and plant roots

Instructions for Use

1. Lay the paving onto the base in accordance with the paving manufacturers instructions. Allow a minimum joint width of 5-6mm and a depth of at least 25mm

2. Carefully open the vacuum-packed bag and sprinkle GEO-Fix over the area to be joined. Work in small areas of approx. 2-3 square metres at a time
   Note. once open the entire bag must be used within one hour

3. Using a soft brush, push the compound into the joints at a 45° angle

4. Firmly compact with a pointing tool, refill and repeat ensuring a fully compacted & topped joint. Firm compaction is the key to the successful laying of GEO-Fix
   Note. ensure the GEO-Fix is finished slightly below the surface

5. After application, brush off the excess with a soft brush, taking care not to brush out any GEO-Fix from the treated area
   GEO-Fix will harden over a 2-3 hour period

GEO-Fix is not suitable for tapered paving joints

GEO-fix Technical PDF